Legal

Map and Measurement Accuracy

What AerialWorx maps and measurements are for, what their accuracy depends on, and when to bring in your licensed surveyor.

Effective November 11, 2026

AerialWorx maps, elevation layers, measurements, volumes and reports (together, the "Deliverables") are produced from drone photographs with photogrammetry software. They are made for planning, progress tracking and communication on construction sites. This page explains what that means for how far you can rely on them.

What the Deliverables are for

  • Seeing what changed on a site between one flight and the next.
  • Estimating lengths, areas, elevations and volumes to plan work and track progress.
  • Giving your team, your client and your subcontractors the same current picture of the site.

What they are not

The Deliverables are not prepared by, or under the responsible charge of, a licensed Professional Surveyor and Mapper. They are not signed or sealed, and they are not a substitute for the work of one. Florida law requires certain measuring and mapping work to be performed by a licensed Professional Surveyor and Mapper. If you need a measurement for a purpose like those below, engage a licensed surveyor. Where we place ground control or supply map and elevation files to a surveying firm, we supply them as data for that firm's own professional judgment.

Unless your licensed surveyor has verified them, do not use the Deliverables for:

  • Pay quantities, progress payments, change orders or claims.
  • Property lines, easements, setbacks or any other boundary question.
  • Elevations submitted to a permitting agency, a flood determination, or any other legal or regulatory filing.
  • Construction layout, final grade acceptance, records of completed construction, or any decision where an error could cause injury or damage.

What accuracy depends on

How closely a map matches the ground changes from flight to flight. Accuracy depends on:

  • whether ground control points were used and how they were measured;
  • the drone's positioning (RTK or standard GPS);
  • flight height and image overlap;
  • light and wind;
  • the site itself: vegetation, standing water, and reflective, uniform or moving surfaces all reduce accuracy.

With well-placed ground control measured by RTK GNSS, under good conditions, errors of a few centimetres are achievable. Without ground control, the whole map can sit several feet from its true position, horizontally and vertically, even when distances measured within it look right. Accuracy is not guaranteed for any flight.

When a flight is processed with ground control, the processing results show how far the map fell from each control point and any checkpoints. Those figures describe that flight at those points. They are evidence about the map, not a promise about every point on it.

Elevations and datums

Two elevations can only be compared if they share a vertical datum. Drone positioning usually records heights above the ellipsoid, which differ from NAVD88 elevations by tens of metres. Tell us which datum your site uses. Before comparing an elevation from our maps with one from another source, confirm that both use the same datum.

Volumes and cut/fill

A volume is calculated between the mapped surface and a base you choose, inside a boundary you draw. It depends on that base, on where the boundary is drawn, on vegetation and water, and on any compaction or swell factor you enter. Cut/fill comparisons carry the error of both surfaces being compared. Volumes and comparisons are estimates for planning and progress tracking, not pay quantities.

Measurements you make

Lengths, areas, elevations, volumes and comparisons you draw in the Portal are calculated from the map as it is. They carry all of the map's error, plus any error from where the shape was placed. The CSV of numbers that a tool writes carries the same limits.

Your decisions

You decide how the Deliverables are used. Before relying on one for a decision with cost, safety or legal consequences, confirm it against a measurement made for that purpose. Our Terms of Service set out the limits of our responsibility for how the Deliverables are used; this page explains the practical reasons for them.